Site Map

 

            Quintum Tenor AX Series Logo

Quintum Tenor AX Series

Quote Request


 

 

 

The Tenor AX Series Offers:

bullet

8, 16, 24 or 48 Analog line and trunk interfaces

bullet

Up to 48 simultaneous VoIP calls

bullet

Available in MultiPath or Gateway configurations

bullet

Support for external Quintum Call Routing Server*

bullet

Support for external Quintum Tenor Monitor

bullet

Support for external Remote Management Session Server*

bullet

Transparent MultiPath Call Routing

bullet

Answer and Disconnect Supervision

bullet

IVR/RADIUS AAA compliant (Multilingual IVR)

bullet

SelectNet™ provides superior voice quality

bullet

Integrated H.323 gatekeeper and SIP B2BUA for Survivability**

A more intelligent way to implement VoIP

The Quintum® Tenor® AX Series gives businesses with analog voice infrastructures an easy, cost-effective way to capitalize on the power of Voice over IP (VoIP). The Tenor integrates a gateway, a gatekeeper, and intelligent call routing, and supports QoS all in one solution. With its MultiPath architecture, the Tenor connects to the data network through a 10/100 Ethernet interface, the voice network through either a PBX or phone, and the public switched telephone network.

Patented SelectNet™ Technology assures high quality voice.
The Tenor employs its patented SelectNet™ Technology to monitor calls for jitter, packet loss, and latency, and can transparently switch mid-call to the voice network whenever conditions demand.

More intelligence means greater flexibility.
With its MultiPath Call Routing, the Tenor can intelligently route calls between the PBX, the PSTN, and the IP network to achieve the best combination of cost and quality. The Tenor can also route calls over IP to reduce costs, and then transparently "hop off" to the PSTN, to reach off-net locations. No other VoIP solution can match this flexibility.

More intelligence means easier installation.
With its MultiPath architecture, the Tenor is the only VoIP solution that can be installed without upgrades to the existing voice or data networks. Tenor connects to the data network through a 10/100 Ethernet interface, and to the enterprise and public voice network through a T1, E1, or PRI interface.

More intelligence means greater reliability.
The Tenor is designed to pass calls through to the existing voice network in the event of system malfunction – even a total power failure.

More intelligence means less network congestion.
With its PacketSaver™ Technology, the Tenor reduces bandwidth consumption up to 57%, by combining voice packets from several calls into a single packet to minimize bandwidth requirements.

More intelligence means better management
The Tenor comes with a set of easy-to-use configuration and management tools, including Tenor Configuration Manager (GUI) and Wizard, and the Tenor Monitor that offers real-time monitoring of alarms, call status and CDRs. Tenors can easily be remotely managed behind NAT firewalls utilizing the Tenor Remote Management Session Server.*

Download Spec Sheet

Quote Request

* Quintum product purchased separately.
** Not supported in initial software release

© 2006 Quintum Technologies, Inc. All rights reserved.  

Project: mygosuMenu

Send mail to Webmaster with questions or comments about this web site.

Site Map Last Modified: 01/14/2009


site.

Site Map Last Modified: 01/14/2009